Description
Description
|
Due to anything you can find on an off-road circuit, UTV Racing is such a demanding activity which does really stress every component of your vehicle. Without any doubt, the transmission belt is one of those and if it should reach critical temperatures of exercise without being kept under control, it could even break down and let you out of the race. |
|
This is the reason why AiM designed the Infrared Belt Temperature System: a simple and reliable way for monitoring the temperature of the transmission belt of your UTV. |
|
The kit is composed by a gauge and an infrared sensor. Reliable, easy to install, perfectly visible in every light condition, it has been designed for working in a hard environment. |
|
|
|
|
|
|
|
Everything Right Under Control |
|
|
|
|
|
|
|
|
|
What the gauge shows |
|
|
|
|
The temperature value is constantly shown and recorded in the internal memory every ten seconds, in order to be evaluated after the test |
|
|
The external supply voltage |
|
|
|
|
|
|
|
|
|
|
|
|
Temperature, No more fear |
|
It is possible to set two different thresholds for the temperature: aWarning leveland anAlarm level. |
|
The temperature value is shown in: |
|
|
Whitewhen its value is under the Warning level |
|
|
Yellowwhen is over the Warning level |
|
|
Redwhen is over the alarm level. In this case, a RED message appears and the red LED starts blinking |
|
|
|
|
|
|
|
|
|
|
Recall your previous test |
|
From online page it is possible to access to data recall section, for revisiting the data of the last 25 tests, that have to be longer than 2 minutes and shorter than 5 hours. |
|
|
|
|
|
|
|
|
Note: Please call for gauge mounting brackets if your unsure of what to order. 801 367 1395
CB 2/5/25
Reviews
There are no reviews yet.